BG Antique Brass 2 Gang Custom Intermediate Light Switch
UK Stock
VAT Invoice
Trade Friendly
Order by 12pm for same-day dispatch
Genuine Brand
Dispatch:
Next working day
Bulk Pricing
Save more when you buy in bulk
2+ items
£11.76 approx. each
2% off
5+ items
£11.64 approx. each
3% off
10+ items (needs 10 in stock)
£11.40 approx. each
5% off
20+ items (needs 20 in stock)
£11.16 approx. each
7% off
Description
BG Antique Brass 2 Gang Custom Intermediate Light Switch
You will be sent the following parts all supplied by BG:
- 1x Faceplate
- 2x Intermediate
Black 10AX Intermediate 1 Module Euro Module Switch
- 16AX switch
- Intermediate switch
- One module width
- Minimum mounting box 25mm
- Black finish
- Manufactured to BS EN 60669-1
How to fit
Your grid switch arrives as a kit: a front plate, a metal grid frame and the switch modules you chose. Modules clip into the frame, the frame screws to the back box, and the plate fits over the top.
Safety first: Only fit this yourself if you are competent to do electrical work. Work must meet BS 7671, and some jobs (for example new circuits, or work in bathrooms) are notifiable under Part P in England and Wales. If in doubt, use a registered electrician.
- Switch the circuit off at the consumer unit and confirm it is dead with a voltage tester before touching any wiring.
- Unscrew the old switch, take a photo of the wiring and label which cable goes to which terminal.
- Check the back box is deep enough: at least 25 mm for switches, 35 mm for dimmers and larger plates (see the spec sheets below).
- Clip each module into the grid frame from the front, in the order shown on this listing, with the 'TOP' marking facing up.
- Wire each module: one-way uses COM and L1, two-way uses COM, L1 and L2, and an intermediate takes both pairs of strapper wires. For dimmers and 20A modules, follow BG's leaflet below.
- Connect the earth (green/yellow) cable to the earth terminal on the grid frame or metal plate.
- Screw the grid frame to the back box, then fit the front plate. Screwless plates clip over the frame.
- Switch the power back on and test every switch and dimmer.
Downloads
Share this:
BG Antique Brass 2 Gang Custom Intermediate Light Switch
£12.00
Have Questions?
Check out our Products FAQs for answers to common questions about this product.
Buy for your business? Unlock trade pricingTrade accounts get bulk discounts, credit terms and priority dispatch.
Apply in 2 mins
Frequently Asked Questions
Next-day delivery is available as a paid option at checkout. Orders placed before 12pm Monday–Friday are dispatched the same day from our Dartford warehouse; we do not dispatch at weekends or on bank holidays. Standard delivery is £3.95 and arrives in 2–4 working days, and delivery is free on orders over £50.
Our switches, sockets, consumer units and fixed-wiring accessories meet BS 7671 (18th Edition) requirements. Each product page lists the relevant British Standards in the specifications. Notifiable installation work should be carried out by a qualified electrician under Part P of the Building Regulations.
Our bathroom zone guide recommends IP65 or higher in Zone 1, at least IP44 in Zone 2, and IP65 or above outdoors. We do not publish an IP rating on individual product pages, so check the rating marked on the product or its manufacturer datasheet, or ask us and we will confirm before you order. Zone-by-zone guidance: https://kenttraders.co.uk/pages/ip-ratings-explained
Yes — registered trade customers receive tiered discounts (up to 40%), VAT invoicing, and 30-day account terms. Apply via the Trade Account page; most applications are approved within one working day.
Eligible unused items can be returned within 30 days of delivery. Faulty goods are covered by your statutory rights and any applicable manufacturer warranty. Email [email protected] to start a return; no return authorisation number is required.