Adhesive Sticker Pad for Smoke Alarms and CO Alarms

Adhesive Sticker Pad for Smoke Alarms and CO Alarms

The self-adhesive sticker pad is double-sided and perfect for surface mounting smoke alarm base plates to the ceiling, a suitable alternative to using screws.

• Ideal for easily fixing smoke and CO alarms
• Large surface area to ensure maximum performance
• Suitable for alarm bases and mounting plates at least 70mm in diameter or 60mm along each edge
• Strong double-sided self-adhesive material
• Dimensions (HxW): 75 x 75mm

CAUTION: To achieve optimum performance, care must be taken to prepare the surface.

Preparation

Our self-adhesive sticker pads are designed to permanently hold your smoke alarm in place. However, to ensure optimum performance, the surface to which the alarm will be fixed must be properly prepared and suitably stable. The area where the sticker pad will be fixed must be flat, clean and free from dust. Attempting to fix your alarm to a dusty or rough surface will not work as the adhesive will not be able to get a good purchase on the substrate.

Ceilings are commonly finished with matt (non-shiny) emulsion paint. Therefore our sticker pads have been designed with this fact in mind. If your ceiling is painted with anything other than matt emulsion, it may be necessary to lightly abrade the surface (making sure to remove any residual dust) prior to installing your sticker pad.

To ensure your self-adhesive sticker pad has fully secured your alarm, take the following steps:

• Ensure the surface is smooth (e.g. no loose paint or textured finishes)
• Gently sand any shiny surfaces
• Ensure the surface is clean and free from dust or chemicals
• Follow the instructions provided, pressing the pad to the alarm first and then the ceiling for a minimum of 20-30 seconds each

Technical Data